[Dx4win] Re: FSK RTTY with DX4WIN

[Jim Reisert AD1C]

Some of this may be addressed here:

http://dx4win.ad1c.us/appnotes/mmtty.htm

73 - Jim AD1C

On 9/1/2008 6:18 PM, Tom Brown wrote:
> Several have asked for the solution so hear goes. Credit to David, G4RQI for getting me headed down this path.
> 
> It appears you do not get the option to specify a COM port in the MMTTY plug-in being used with DX4WIN.  David suggested I setup the MMTTY program itself (outside of DX4WIN), specifying my PTT COM port on the TX tab of the setup options and on the MISC tab set the TX port to COM-Txd(FSK).  Make sure MMTTY works perfectly by itself and then try to use it from DX4WIN.  
> 
> Now, back to DX4WIN MMTTY.  Make sure you do not specify the COM port for PTT here. You will get an error like "Port already in use" if you do.  To check this: From the DX4WIN MMTTY window press CONTROL S and the window to set the PTT port comes up.  I set mine to PTT CONTROL and RTS and the error stopped. 
> 
> After doing that, my FSK RTTY using COM1 for data and PTT is working fine. 
>  
> 73 - Tom, W2EQ 

-- 
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us