[Dx4win] Problems opening up Help file in 7.05 ?

[Kurt Zimmerman]

OK, after seeing that this might be a shortcut problem you will want to double check 2 things.  First look at the properties in the shortcut to see where the "start in" setting is.  Make sure it is where the executable is located.  Second check to see if a "compatibility mode" is set.  If it is it shouldn't.  

That is about all I can offer at this time.  Hope this helps.

w2mw

Kurt W. Zimmerman
My Profile:
http://www.linkedin.com/in/kurtwzimmerman





--- On Wed, 10/22/08, Kurt Zimmerman <kzimmerm at yahoo.com> wrote:

> From: Kurt Zimmerman <kzimmerm at yahoo.com>
> Subject: Re: [Dx4win] Problems opening up Help file in 7.05 ?
> To: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>
> Date: Wednesday, October 22, 2008, 10:48 PM
> Just wondering what port is being accesses.  Port being IP
> port.  If this is something that just started it is possible
> that something might be blocking the port.
> 
> Do you have a machine you can connect directly to the
> internet without going through a router? 
> 
> Just trying to think of all possibilities.
> 
> 73;
> w2mw
> 
> Kurt W. Zimmerman
> My Profile:
> http://www.linkedin.com/in/kurtwzimmerman
> 
> 
> 
> 
> 
> --- On Wed, 10/22/08, Jim Reisert AD1C
> <jjreisert at alum.mit.edu> wrote:
> 
> > From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
> > Subject: Re: [Dx4win] Problems opening up Help file in
> 7.05 ?
> > To: "DX4WIN" <dx4win at mailman.qth.net>
> > Date: Wednesday, October 22, 2008, 10:32 PM
> > And this was on two different computers, so
> there's
> > something else going 
> > on here.
> > 
> > On 10/22/2008 8:30 PM, Jim Reisert AD1C wrote:
> > 
> > > This is the other message, which usually precedes
> the
> > one below:
> > >
> > > Could not get help contents
> > > Error = 0
> > > The operation completed successfully
> > >
> > > - Jim
> > >
> > > On 10/22/2008 8:18 PM, Jim Reisert AD1C wrote:
> > >> Is anyone having problems using the on-line
> help?
> > >>
> > >> I get a couple of different message boxes
> from
> > Help -> Contents, the
> > >> current one says:
> > >>
> > >> "Error = 10035
> > >> A non-blocking socket operation could not be
> > completed immediately"
> > >>
> > >> I never had these problems with 7.04. If I
> restart
> > the program, Help
> > >> will work for a bit, then stop working again.
> > >>
> > >> I'm running WinXP SP3 with all subsequent
> > updates.
> > 
> > -- 
> > Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>,
> > http://www.ad1c.us
> > _______________________________________________
> > Dx4win mailing list
> > Dx4win at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/dx4win