[Dx4win] MMTTY w/704 & 705

[DAVID DERAIN]

After 3 days of pulling my hair out I have solved the problem.
  
The problem was in the MMTTY keying setup window  (ALT S in the MMTTY window).  With MMTTY using COM 1 for FSK the MMTTY keying setup cannot be set to COM 1 also.  When running in the FSK mode the keying setup is irrelevant and should not matter, but it does. 
How the keying got set to COM 1 for v704 & 705 only I do not know.
 
Thanks to those who had suggestions.  

--- On Fri, 10/17/08, Mike Rhodes <w8dn at roadrunner.com> wrote:

From: Mike Rhodes <w8dn at roadrunner.com>
Subject: Re: [Dx4win] MMTTY w/704 & 705
To: dx4win at mailman.qth.net
Date: Friday, October 17, 2008, 6:08 AM

I know it seems terribly obvious but have you rebooted lately? You might 
even have to go as far as physically dropping power to your PC.

Good Luck,
Mike / W8DN

************

DAVID DERAIN wrote:
> I am having a MMTTY problem with v704 & v705.  I have had to go back 
> to v702 where everything works fine.  I have also tried this on my 
> back-up computer with the same results.
>  
> PROBLEM: When using the RTTY macros I get an "ie Open - device
already 
> open" error.
>  
> I am running RTTY FSK using COM 1 (A real COM Port, no USB to COM 
> converter)
> Has anyone else seen this problem.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>   
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/dx4win/attachments/20081017/d3400a85/attachment.htm