[Dx4win] Rotator Yaesu

[Paul van der Eijk]

Bill,

Looked through 11 years of email, but found only one query if DX4WIN
supported the GS232A interface. Other messages were all about using
different interface solutions. I downloaded the software document, and
it looked simple enough. I added this for the next release.

--Paul, KK4HD

AC0W wrote:
> I've inquired about this in the past as DX4WIN does not support the Yaesu rotors. I have provided all the information to add it into DX4WIN. The response I have received in the past is to purchase an interface box (I forget the name right now but it was roughly $400 US) at another significant investment. So my Yaesu rotor is not controlled by DX4WIN while the several other applications I have can control it.
>
> If I have to make an significant investment for DX4WIN to communicate to my Yaesu Rotor that investment will most likely be a different general purpose logger that can communicate without the special interface box.
>
> Bill
> AC0W
>
> ---- Wanadoo <f8cil at wanadoo.fr> wrote: 
> Hello,
>
>  
>
> I'm using the rotor control DXA from K4JRG.
>
> Is anybody use this with DX4WIN ?
>
> I did not see any Yaesu DXA rotators listed (GS-232 protocol) which is what
> Yaesu DXA rotor use. 
>
> Many thanks for any information.
>
>  
>
> 73 F8CIL Pascal
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.175 / Virus Database: 270.9.2/1783 - Release Date: 11/12/2008 10:01 AM
>
>