[Dx4win] Rotator Yaesu

[Larry Gauthier (K8UT)]

Bill,

I use the EA4TX ARS interface between DX4WIN, a PC parallel port, and my 
Yeasu G-800DXA rotor. Works great. Current price $E110. (Euros)

-larry
K8UT
----- Original Message ----- 
From: "AC0W" <ac0w at charter.net>
To: <Dx4win at mailman.qth.net>; "Wanadoo" <f8cil at wanadoo.fr>
Sent: Wednesday, November 12, 2008 15:13
Subject: Re: [Dx4win] Rotator Yaesu


> I've inquired about this in the past as DX4WIN does not support the Yaesu 
> rotors. I have provided all the information to add it into DX4WIN. The 
> response I have received in the past is to purchase an interface box (I 
> forget the name right now but it was roughly $400 US) at another 
> significant investment. So my Yaesu rotor is not controlled by DX4WIN 
> while the several other applications I have can control it.
>
> If I have to make an significant investment for DX4WIN to communicate to 
> my Yaesu Rotor that investment will most likely be a different general 
> purpose logger that can communicate without the special interface box.
>
> Bill
> AC0W
>
> ---- Wanadoo <f8cil at wanadoo.fr> wrote:
> Hello,
>
>
>
> I'm using the rotor control DXA from K4JRG.
>
> Is anybody use this with DX4WIN ?
>
> I did not see any Yaesu DXA rotators listed (GS-232 protocol) which is 
> what
> Yaesu DXA rotor use.
>
> Many thanks for any information.
>
>
>
> 73 F8CIL Pascal
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>