[Dx4win] Set up QRP log

[David M. Monfried]

Perfect, Jim. Thanks very much.

Dave, W2PK 

-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu] 
Sent: Sunday, March 23, 2008 8:15 AM
To: David M. Monfried
Cc: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Set up QRP log

Hi Dave,

Don't assign a group number to QRP QSOs.  Just check the QRP box.  I think
it automatically becomes group number 254 or 255.

F8 filters do not affect DXCC status.  You must create a Group Filter (See
Filter -> Selection), name it QRP (or something else), check the QRP box at
the bottom, then update and save.

DX4WIN clears ALL filters when you re-open the log.  All you need to do then
is Filter -> Selection, pick your QRP filter name from the drop-down box at
the top, then OK.

73 - Jim AD1C

On 3/23/2008 8:10 AM, David M. Monfried wrote:
> Going slightly nuts here trying to set up a separate log just for QRP. 
> I have 431 QRP Q's, a small subset of the entire log.
> 
> All QRP log entries are marked with both the QRP box set to "Y" and 
> with "Group" showing the number 1.
> 
> The objective is to track my DXCC and band/mode/country status just 
> for DXCC.
> 
> When I select Filter (F8) and sort by either QRP or Group 1, up pops 
> the correct info (although the band/mode/country status in the 
> "Country" window shows status for the entire log, not just the QRP
subset).
> 
> The problem is can save the log (via File/Save As/W2PK QRP.dxl), but 
> when I open that newly-saved file, I get the entire log, not just the QRP
subset.
> 
> I'm certain that I'm overlooking something very basic and simple...but 
> cannot figure out what it might be.
> 
> Any help would be appreciated.
> 
> Tnx.
> 
> 73,
> Dave, W2PK


--
Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us