[Dx4win] Rig files... more questions.

[ON4AOI]

Walt,
That's why I use 2 Rig files for my IC7800
One with 500Hz for cw-fsk and 2.2Khz for SSB
And the other with 250Hz for cw & fsk and 1.8Khz for SSB

I change the standard 500Hz quickly to the 250Hz version if needed
In my preferences.

Guy ON4AOI   

-----Oorspronkelijk bericht-----
Van: K2WK [mailto:k2wk at wildblue.net] 
Verzonden: Wednesday, January 23, 2008 12:00 PM
Aan: 'ON4AOI'
Onderwerp: RE: [Dx4win] Rig files... more questions.

Guy,

Thank you for the reply and the helpful information.  It's unfortunate
that one can't change the filter setting per mode.

Keep up the good work on informing the community with your wisdom
of DX4Win.  I learned a lot from your posts.

 
                        Regards,

                                      Walt Kornienko - K2WK
                                      Gordonsville, VA



-----Original Message-----
From: ON4AOI [mailto:on4aoi at skynet.be] 
Sent: Wednesday, January 23, 2008 12:24 AM
To: k2wk at wildblue.net
Cc: Dx4win at mailman.qth.net
Subject: RE: [Dx4win] Rig files... more questions.

Walt,

Notes can be added if you edit the rigfile in the database
But if you don't know how to do it be carefull.


The CW filter setting can be changed with a text editor
Open your rigfile with textpad or similar program
The number before FD is used for CW....
BUT this also changes the SSB-RTTY filter settings

CW
1 = 1.2 Khz 
2 = 500 hz
3 = 250 hz 

This is the command  
[RC-Set Mode]
CSTR=060002FD

Guy ON4AOI



-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens K2WK
Verzonden: Tuesday, January 22, 2008 7:50 PM
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] Rig files... more questions.

Hey all,

I was wondering what the meaning of some of the parameters 
are that make up the rig files, most specifically for the IC-756 Pro III.
Some of them are quite self-explanatory, it's the others that puzzle me.

Here's my brief list:

1) "NOTES=Selects narrow filter for CW/SSB."  How is this done, i.e.
    what command is sent to the rig and how does that work?

    Personally, I'd like the rig to go to the Wide CW Filter.  How and where
    do I change this in the rig file or how do I send a CI-V command to
    accomplish same?

2)       RMUL= 1.00000000000000E+0000
    and WMUL= 1.00000000000000E+0000
    What are these multipliers?

3) RITSCL= 1.00000000000000E+0000
    Hmmm, what does this do?

I have access to the CI-V command set, but have never tried sending commands
to the radio, any suggestions?


 
                             73 de Walt - K2WK

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win