[Dx4win] Help needed....Error Port driver

ON4AOI on4aoi at skynet.be
Sat Feb 23 06:57:46 EST 2008


Also he needs to check if the portmap.ini is setup correctly in the save
Directory, just in case XP gave other number to the LPT port 

Guy ON4AOI

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Pete Smith
Verzonden: Saturday, February 23, 2008 12:30 PM
Aan: dx4win at mailman.qth.net
Onderwerp: Re: [Dx4win] Help needed....Error Port driver

This sounds more to me like he has a parallel port configured to send CW, 
and since Windows XP doesn't address port hardware directly, he needs 
DLPortIO or the equivalent.

73, Pete N4ZR

At 06:23 PM 2/22/2008, Jim Reisert AD1C wrote:

>--- Carol Richards <n2mm at comcast.net> wrote:
>
> > I have been using DX4WIN for 7 years or so on a win 98 or win ME 
> platform. I
> > just upgraded to WIN XP and when I tried to boot up DX4WIN, I received 
> a PORT
> > DRIVER error message. Any thoughts?
>
>Did you COPY the program to the new PC, or INSTALL it?  You should try
>installing it to see if the problem goes away.  Make sure to backup all the
>stuff in your SAVE directory, and copy it back after the install.
>
>- Jim
>
>
>--
>Jim Reisert AD1C/Ø, <jjreisert at alum.mit.edu>, http://www.ad1c.us
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win



More information about the Dx4win mailing list