[Dx4win] RE: Dx4win Digest, Vol 56, Issue 22

[Andrew Cowan]

Kostas,


Try this program I use it with Dx4Win and HamradioDeluxe and N1MM at the
same time there is sometimes a drop out of information.
Which I put down to my PC now been overworked.

http://www.eterlogic.com/Products.VSPE.html

FREE VIRTUAL SERIAL PORTS EMULATOR

Andrew   GM0UDL


Message: 1
Date: Wed, 17 Dec 2008 12:57:01 +0200
From: "Kostas SV1DPI" <sv1dpi at otenet.gr>
Subject: Re: [Dx4win] ADIF to DX4WIN log conversion version 3.1
To: "REFLECTOR dx4win" <dx4win at mailman.qth.net>
Message-ID: <2311995ADB8B47EEACFE59E7771DC077 at sv1dpimain>
Content-Type: text/plain; format=flowed; charset="ISO-8859-1";
	reply-type=response

I would like to have a band map also. When you sort the spots you will
see 
many spots for the same station and you have not an easy way to check
all 
the band. It helps just to know what a station is when you listen a qso
or a 
pileup. By the way ve3nea sells a program called band master. The bad
news 
are that it needs to have radio control and there is no way (?) both 
programs band master and dx4win have radio control over the same port. 
ve3nea gives omnirig for free to make the trick but dx4win doesn't
support 
it. Maybe the only way is a program which gives virtual com ports. So
this 
way you must setup dx4win to see vitual com port 8 and band master to
see 
virtual port 7.  then we will have Virtual ports 7 and 8 to be directed
to 
port 1 where the radio is connected. The problem is that i have not
found a 
free program to do it that really works without other problems. Anyone
who 
have tried one and it is free? I can find some of them in internet but
the 
first one i had tried, messed my com ports after installed
Kostas sv1dpi