[Dx4win] MMTTY

[Steve GW4BLE]

The problem is with the driver for the Yaesu FT2000, this is *not* an issue
for Icom rigs.

73

Steve
GW4BLE

________________________________________
From: W5KI at aol.com [mailto:W5KI at aol.com] 
Sent: 26 September 2007 01:19
To: GW4BLE at btconnect.com; dx4win at mailman.qth.net
Subject: Re: [Dx4win] MMTTY

 
 
 
>As mentioned previously though, SPLIT operation on RTTY (MMTTY) doesn’t
work
>properly; if you call someone on the 2nd VFO the received signal on the
main
>VFO is then reversed.  I suppose it depends how much split frequency
>operation you do on MMTTY, but it was annoying to find this happen when
>calling the guys at 3B7.

>There  *could* be some other anomalies too.
 
I use MMTTY here in the FSK (vs AFSK) mode with my Icom, I have not
"noticed" that problem--sure didn't realize if that happens..... then
again... maybe the other station hit "REV" and didn't tell me... I worked
3B7C on 10 mhz but don't remember whether it was split or not??  BTW, I
usually run it "outside" DX4WIN, unless I am in a RUSH to call someone.
 
Steve, W5KI


________________________________________
See what's new at AOL.com and Make AOL Your Homepage.