[Dx4win] FT2000 MMTTY & DX4WIN

[KR4DA]

Hi Steve,

Just a note:
With the FT-2000 v8i driver when you do a ANN DX and you are in split mode
the ANN DX window will read and display the VFO A and VFO B freqs
REVERSED and will send the spot out reversed also.

I use a PK900 for rtty..but this issue could be related to yours.

DX4WIN guys any progress on the FT-2000 Driver so as to fix the
ANN DX feature so it works correctly.
The FT-2000 has been a big seller for Yaesu.

Steve GW4BLE wrote:
> Any FT2000 users out there trying to work RTTY (MMTTY)  split frequency with
> DX4WIN?
>
>  
>
> Took me a while to realise what was going on , but when operating split
> frequency, i.e. transmitting on VFO 'B' whilst receiving on VFO 'A' the
> received RTTY signal is reversed in polarity following a transmit on the
> split VFO.  You have to actually transmit, and then listen on the other VFO
> for this to happen.   
>
>  
>
> At first, wasn't sure if it was a rig, software or operator (!) error.
> Fired up my contest programme (Writelog), and all was well, so appears to be
> a fault in the DX4WIN driver software for the FT2000.
>
>  
>
> 73
>
>  
>
> Steve
>
> GW4BLE
>
>  
>
>  
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>   

-- 
Bob
Vmoa chat list -> http://autos.groups.yahoo.com/group/vmoachat/
Vmoa tech list home -> http://autos.groups.yahoo.com/group/vmoatech/


Middleburg Fl (South Jacksonville)
ICQ 13912841
Web Page http://bellsouthpwp.net/k/r/kr4da

Visit the FDXPG at  http://www.geocities.com/w4wx1/

Ham Radio Calls: KR4DA FG/KR4DA J79DA HK0/KR4DA

Motorcycles CBMMA #4
1977 XS750D 1J7008405
1997 Vmax12J VMOA #504