[Dx4win] MicroHam USB II

[F6EXV]

Hi Jim and all
I have created the virtual com4 port for the radio, and that is the com 
port I have configured on DX4Win. It does not work, and the radio times out.
The speed and stop bits are configured OK.
I have tried on both DX4Win 7.01 and 7.03, both with the FT1000MP and 
the FT1000MP MkV
None will work....
The cables are supplied by the manufacturer, or to be precise, the 
seller in Germany.
Thanks for the tip on the MicroHam reflector. I'll go there right away !
Thanks Dave for your call, even though it was not successfull... Have a 
great trip to beautiful 5B4 land...
73 all
Paul F6EXV

Jim Reisert AD1C wrote:

>--- F6EXV <f6exv at wanadoo.fr> wrote:
>
>  
>
>>Trying to configure the just received MicroHam USB II with DX4Win... and 
>>of course nothing works !!!!
>>    
>>
>
>  
>
>>Using a FT1000MP Mark V, DX4Win version 7.01, MMTTY version 1.65D and 
>>Windows XP.
>>    
>>
>
>Hi Paul,
>
>I'd start with the radio first.  You should be able to create a virtual COM
>port using the microHam software, then use that COM port in DX4WIN as your
>radio COM port.  If I recall, Yaesu is 4800 baud, 2 stop bits.  I don't know if
>the stop bits are configured in the microHam router program, or in DX4WIn.
>
>Then try MMTTY stand-alone, and try to get FSK and PTT working through those
>virtual COM ports.
>
>The people on the microHam reflector (esp. Joe W4TV) are pretty helpful in
>answering questions:
>
>    http://groups.yahoo.com/group/microHAM/
>
>Good luck.
>
>- Jim
>
>
>--
>Jim Reisert AD1C/0, <jjreisert at alum.mit.edu>, http://www.ad1c.us
>
>
>
>  
>