[Dx4win] Filtering and Award Tracking

[Paul van der Eijk]

Kelly,

QSO Window | Filter | Selection
Click Add
Replace: 'Replace this name' with 5BWAS
Enable: Group Filter
Double-Click on Group 3 and on group 4
Click on Update
Click on Ok

You now have a selection filter 5BWAS and it is active.
When you open a log or start DX4WIN no filter is active,
you have to enable again.
QSO Window | Filter | Selection
Select 5BWAS
Click Ok


Award counts etc. now only 'see' the QSOs matching the group numbers
of the 5BWAS filter.
If you want to see all QSOs, same procedure, except select the
filter 'All QSOs'.

--Paul

 

At 12:44 PM 3/10/2007, Kelly Johnson wrote:
>Is there a way of making the award tracking of DX4WIN exclude QSOs
>according to a criteria such as Group Number?  My log is currently
>split into 5 group numbers: 1 for each callsign/station-location I've
>had since becoming a ham.  All of the QSOs are valid for DXCC since
>they are all in the U.S, but for 5BWAS all QSO's need to be made from
>within a 50 mile radius.  That means (for me) only groups 3 and 4
>should be used for 5BWAS award tracking.
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
pvandereijk at cox.net
http://www.dx4win.com