[Dx4win] QSL Labels

[Kostas sv1dpi]

When i receive a direct request and i want to print the answer i am doing 
this...
I change the qsl method to $
i mark the Label to Yes
Go to print: Labels>Print qsl labels
in the print qsl labels window i choose qsl method instead of all to $. 
Don't forget to uncheck the print method labels
and go to print.
If you use a paper with a lot of labels, after the 1st card maybe you need 
another one tip.
Notice that in Print qsl labels window, there is a small window says missing 
labels. So if you have unstick the 1st labels you will put 1 instead of 0, 
if you have used 2 labels in past, you 'll put 2 and the printing will start 
in nr 3 label, etc
good luck

Kostas sv1dpi

PS By the way i also prefer to use my old cards to reply. These have boxes. 
But my new cards have not boxes because i print the cards, so the above 
method is needed....

----- Original Message ----- 
From: "Scott Millick" <smillick at wamusa.com>
To: <dx4win at mailman.qth.net>
Sent: Tuesday, March 06, 2007 9:34 PM
Subject: [Dx4win] QSL Labels


> If you want to print only one label (you got a card and want to send one 
> back) instead of the ones that you already have marked for printing how do 
> you do it or can it be done as I do not see this in the manual
>
> Scotty K9SM
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>