[Dx4win] Band plan and Dx4win --- THANKS !!!!

[Glenn Millar]

Thanks Guys for all the replies.  To be honest with you I had been looking 
in the wrong section as I was looking in the radio setup and yet again 
you've shown me its simple when you know how.

Thanks again for taking the time

Regards Glenn


----- Original Message ----- 
From: "ON4AOI" <on4aoi at skynet.be>
To: "'Glenn Millar'" <glenn at gi0kvq.co.uk>
Cc: <dx4win at mailman.qth.net>
Sent: Wednesday, January 31, 2007 11:09 AM
Subject: RE: [Dx4win] Band plan and Dx4win


> Glenn,
>
> Go into preferences
> Go to the QSO TAB
> Look for CW frequency Cutoff
> Select 40 M
> Change standard 7150 to 7040
> Save changes and exit
>
> Guy ON4AOI
>
>
> -----Oorspronkelijk bericht-----
> Van: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net]
> Namens Glenn Millar
> Verzonden: Wednesday, January 31, 2007 9:31 AM
> Aan: Dx4win at mailman.qth.net
> Onderwerp: [Dx4win] Band plan and Dx4win
>
> Is there any way of editing the band plan that DX4win understands for 40m.
> Say station VU7LD is spotted on 7.065 I can guess its going to be an  LSB
> signal but yet when I click on the spot on the cluster with this 
> information
> the rig goes to the correct freq OK but sets up in CW instead of SSB. 
> (Yes
> I know some of you will be asking do you want DX4win to work the station 
> as
> well for me - getting too lazy)
>
>
>
> I am running an FT1000MP and suspect the answer to my query is as usual 
> dead
> easy to spot but perhaps I have overlooked it.
>
>
>
> Regards Glenn
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>