[Dx4win] winkey2 support

[Pete Smith]

OK, Jim et al - I found my problem.  On the CW tab, I had identified COM7 as both my Winkey port and my software CW port.  Changing the latter to None started things working properly.  I shoulda guessed!

73, Pete N4ZR

At 11:38 PM 1/22/2007, Jim Reisert AD1C wrote:
>At 05:22 PM 1/22/2007, Pete Smith wrote:
>
>>I'm having the same problem.  Just switched to 7.02.15, which I upgraded to from 6.03, largely because of Winkey support.  It appears, however, that DX4WIN can't address the virtual serial ports created by the USB driver.  I have set up COM7 for Winkey, but get no indication that they are communicating with each other.  When I monitor the port, there is no indication of any data flow from DX4WIN to the Winkey.
>
>I am using a microHam microKEYER and the Winkey device keys perfectly in DX4WIN.  It also works in Writelog.
>
>In the DX4WIN CW Preferences, I set Device type to Winkey and Port to COM7.  All other boxes are None or 0.  Make sure that the virtual COM port is for Winkey only, and is not used by any other device in DX4WIN.
>
>73 - Jim AD1C
>
>
>-- 
>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
>USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us