[Dx4win] winkey2 support

[Marc Wullaert ON4MA]

----- Original Message -----
From: "Pete Smith" <pete.n4zr at gmail.com>
To: "Mark" <n2qt at arrl.net>; "DX4WIN List Server" <DX4WIN at mailman.qth.net>
Sent: Monday, January 22, 2007 10:22 PM
Subject: Re: [Dx4win] winkey2 support


> I'm having the same problem.  Just switched to 7.02.15, which I upgraded
to from 6.03, largely because of Winkey support.  It appears, however, that
DX4WIN can't address the virtual serial ports created by the USB driver.  I
have set up COM7 for Winkey, but get no indication that they are
communicating with each other.  When I monitor the port, there is no
indication of any data flow from DX4WIN to the Winkey.
>
> Can anyone confirm if this is a known limitation of the current release of
DX4WIN?  The virtual serial ports seem to work fine for rig control (using a
MK2R+, which has an embedded Winkey 2).
>
> 73, Pete N4ZR
>
> At 04:32 PM 1/22/2007, Mark wrote:
> >I've had some problems with using my new WINKEY2 (USB) with DX4WIN.
> >(works ok with the WINKEYER2)
> >
> >Would like to hear from someone who has been successful in using this.
(and if
> >it's possible to key alternate rigs using it within DX4WIN)
> >
> >Mark n2qt
> >
> >
> >_______________________________________________
> >Dx4win mailing list
> >Dx4win at mailman.qth.net
> >http://mailman.qth.net/mailman/listinfo/dx4win
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.17.5/645 - Release Date: 22/01/2007
16:10
>