[Dx4win] Another Label Printing Question

[Les Kalmus]

What worked for me was:

Set a filter for the specific date of the QSO; filter|selection, then 
set a date range filter with the same start & end date.
Once you have that filter set, F8 to find the call. You should get only 
that call for the label run. If you get more than the one label to be 
printed, labels|clear print flag will clear the flags. Then reset the 
flag to Y for the one QSO you want, print it, then Labels|Set print flag 
to turn on that group again. Don't forget to set the print flag = N for 
the one you just printed.
Then set the filter back to all QSOs.

GL, Les W2LK


Tom LeClerc W1TJL wrote:
> In all the 1000s of labels I've printed using DX4Win one thing I have
> never done was print a single label or a coule of labels based on a
> filter.  Today I wanted to print all the laems for a pecific call and
> I couldn't find a way to do it.  There must be a way!
>
> I tried setting the filter for just the labels I wanted to print but
> still got the whole list of 263 labels when I tried printing.
>
> I tried the help file but nothing there about limiting the scope of
> printing labels.
>
> I'd appreciate a hint...  :-)
>
> 73, Tom W1TJL
>