[Dx4win] TS-850 control under 7.02

[Dave Perry N4QS]

Kris,

If you double click on the spot a second time, it will normally switch the 
VFOs so that they are split correctly.  Why it doesn't do this the first 
time, I have no clue.

Dave, N4QS

----- Original Message ----- 
From: "Kris Mraz" <n5kilomike at gmail.com>
To: <dx4win at mailman.qth.net>
Sent: Tuesday, February 27, 2007 10:52 PM
Subject: [Dx4win] TS-850 control under 7.02


> Sorry if this has already been covered. I've checked the
> archives but didn't find any related posts.
>
> I've recently upgraded from 5.03 to 7.02. I notice that the
> VFO control for my TS-850 is different when clicking a spot
> that is split.
>
> Under 5.03 the DX frequency is set in VFO A and the QSX frequency
> is set in VFO B but the VFOs aren't split (Ie both TX and RX
> are set to VFO A). The I manually split the VFOs. [I've come to live with
> that little quirk].
>
> Under 7.02 the frequencies are set and the VFOs aren't
> split, as before. The difference now is that VFO B is selected
> for both TX and RX. Ie, the QSX frequency.
>
> If a non-split spot is clicked the DX frequency is set into the
> currently selected TX VFO (either A or B) and VFO A is selected.
> That is, if I'm on VFO B and click a spot, its frequency goes into
> VFO B and the radio switches to VFO A. So now I have to
> manually select VFO B.
>
> I hope all that is clear. So my question is: Is there a way to
> change the default radio control behavior (eg, via an edittable control
> file)
> or is it set in code?
>
> tnx,
>
> Kris N5KM
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.446 / Virus Database: 268.18.4/705 - Release Date: 2/27/2007 
> 3:24 PM
>
>