[Dx4win] Winkey Problems

[ON4AOI]

Hi Lee,
Sorry to hear that from you.
The problem I had was the one I described
in earlier mails.

Dx4win seems memories on wish COMPORT 
it was installed the first time and 
has problems when it is moved to another port
If you remember where it was connected the very first
time then you probably can also correct the problem.

The other possibility I just think of is that you have
The BAD update from WINDOWS XP where many things went
Wrong with port communications e.o.

This was posted a few months ago here on this reflector,
I will try to find It back in + 18000 dx4win mails I have here
hi


73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm


-----Original Message-----
From: Lee, N5PO [mailto:n5po at sbcglobal.net] 
Sent: Tuesday, October 24, 2006 2:43 PM
To: ON4AOI
Subject: RE: [Dx4win] Winkey Problems

Not So....I have my Winkey hooked directly  to a pci
card..COM4 and it does not work.  I also have COM1 and
COM3.  Does not work there either...I have used 2
different computers, same results..


Lee, N5PO




--- ON4AOI <on4aoi at skynet.be> wrote:

> Ok Paul,
> That is the problem
> You first have to disable the winkey 
> with the USB to serial converter CONNECTED
> and normally WORKING in dx4win
> 
> Next close dx4win normally,
> (maybe you need to reboot also)
> 
> unplug the USB to serial
> attach to the pci serial card and then
> restart DX4WIN and select where winkey 
> is attached now.
> 
> It will work then
>  
> 
> 73 Guy ON4AOI
> 
> BAND DECODER and related stuff at
> 
> http://www.on4aoi.be/banddecoder.htm
> 
> DX4WIN soft and related stuff at
> 
> http://www.on4aoi.be/dx4win.htm
> 
> DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces
> at
> 
>  http://www.on4aoi.be/keyer.htm
> 
> ARSWIN link and related stuff at
> 
> http://www.on4aoi.be/web7.htm
> 
> DXTELNET soft and related stuff at
> 
> http://www.on4aoi.be/dxt.htm
> 
> 
> -----Original Message-----
> From: Paul Pescitelli [mailto:dx.k4uj at gmail.com] 
> Sent: Monday, October 23, 2006 9:08 PM
> To: ON4AOI
> Subject: Re: [Dx4win] Winkey Problems
> 
> Yes, I did have a USB to serial converter...
> However, I took it out
> this morning and replaced it with a new pci serial
> card. I still have
> the same problem.
> 
> regards,
> Paul
> 
> On 10/23/06, ON4AOI <on4aoi at skynet.be> wrote:
> > Yep Paul,
> > You have probably unplugged or plugged in the
> winkey
> > via a USB to serial converter and then you get
> this problem.
> > Check if winkey is on com1 or has a good
> connection
> >
> > you only can end DX4WIN with CTRL+ALT+DEL and then
> stop the program 2 or 3
> > times
> >
> >
> >
> > 73 Guy ON4AOI
> >
> > BAND DECODER and related stuff at
> >
> > http://www.on4aoi.be/banddecoder.htm
> >
> > DX4WIN soft and related stuff at
> >
> > http://www.on4aoi.be/dx4win.htm
> >
> > DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY
> interfaces at
> >
> >  http://www.on4aoi.be/keyer.htm
> >
> > ARSWIN link and related stuff at
> >
> > http://www.on4aoi.be/web7.htm
> >
> > DXTELNET soft and related stuff at
> >
> > http://www.on4aoi.be/dxt.htm
> >
> >
> > -----Original Message-----
> > From:
> dx4win-bounces+on4aoi=skynet.be at mailman.qth.net
> >
>
[mailto:dx4win-bounces+on4aoi=skynet.be at mailman.qth.net]
> On Behalf Of Paul
> > Pescitelli
> > Sent: Monday, October 23, 2006 3:15 PM
> > To: dx4win at mailman.qth.net
> > Subject: [Dx4win] Winkey Problems
> >
> > Running version 7.02.15
> >
> > When I try to open the CW keying window I get an
> error on the title
> > bar of the window that says  "could not open
> winkey port 1". So then I
> > try to close the window and then a modal dialog
> box appears with
> >
> > An exception occured!
> > ThreadError:Access is denied(5)
> >
> > With only an OK button, so I click it..the box
> goes away, but you
> > still cant do anything in the program. At this
> point you can't even
> > quit the program, so there is surely a bug or 3 in
> there somewhere.
> >
> > I have tested the com port setup with Logger32, so
> I know everything
> > works from a hardware perspective.
> >
> > Any ideas ?
> > --
> > 73 - Paul    K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E,
> ZF2UJ
> > ==============================
> > http://www.dx-is.com
> > http://www.openhsmm.org
> > ==============================
> > _______________________________________________
> > Dx4win mailing list
> > Dx4win at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/dx4win
> >
> >
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>