[Dx4win] Winkey Problems

[ON4AOI]

Yep Paul,
You have probably unplugged or plugged in the winkey 
via a USB to serial converter and then you get this problem.
Check if winkey is on com1 or has a good connection

you only can end DX4WIN with CTRL+ALT+DEL and then stop the program 2 or 3
times



73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm


-----Original Message-----
From: dx4win-bounces+on4aoi=skynet.be at mailman.qth.net
[mailto:dx4win-bounces+on4aoi=skynet.be at mailman.qth.net] On Behalf Of Paul
Pescitelli
Sent: Monday, October 23, 2006 3:15 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Winkey Problems

Running version 7.02.15

When I try to open the CW keying window I get an error on the title
bar of the window that says  "could not open winkey port 1". So then I
try to close the window and then a modal dialog box appears with

An exception occured!
ThreadError:Access is denied(5)

With only an OK button, so I click it..the box goes away, but you
still cant do anything in the program. At this point you can't even
quit the program, so there is surely a bug or 3 in there somewhere.

I have tested the com port setup with Logger32, so I know everything
works from a hardware perspective.

Any ideas ?
-- 
73 - Paul    K4UJ / FS, KP2, KP4, PJ6, PJ7,VP2E, ZF2UJ
==============================
http://www.dx-is.com
http://www.openhsmm.org
==============================
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win