[Dx4win] Comm port -> USB port adapter

[ON4AOI]

Hi Dave,
If there are already 8 comports on your computer then I suggest
You connect your rig to one below 8.
But mu guess is that your computer gave this number randomly
Go in your Windows/SYSTEM/hardware/ports and change the comport NR to a
number Below 8 that is not used.
  
 

73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm

-----Original Message-----
From: dx4win-bounces+on4aoi=skynet.be at mailman.qth.net
[mailto:dx4win-bounces+on4aoi=skynet.be at mailman.qth.net] On Behalf Of David
M. Monfried
Sent: Wednesday, October 18, 2006 9:50 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Comm port -> USB port adapter


 


I'm using DX4WIN (latest version) to control an IC-7000. The rig is 
connected to the computer via a comm port-> USB adapter. The computer's 
Device Manager says the adapter is working properly as COM9. The 
problem is that DX4WIN only goes up to Comm8. Any ideas would be 
appreciated! Thanks.
 
Dave, W2PK

 

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win