FW: [Dx4win] ICOM IC 756 Pro II

[Chris Sauvageot]

DX4WIN has not. All other software has also not!

Have send you yesterday a PM with some hints for a Virtual Port software. Thats the only way!

Remember: a virtual port is not a piece of hardware - its virtual!
Example:
A virtual soft runs on a PC, a PC has only COM1 (hardware) - virtual soft creates a COM2 and COM3(virtual).
You adjust DX4WIN to COM 2 and HRD to COM 3.
If now DX4WIN communicate with COM2 - virtual soft switch internal all trafic to COM1
If now HRD communicate with COM3 - virtual soft switch internal all trafic to COM1

Virtual soft double your COM 1 !! VirtualVP create up to 4 virtual ports.

Hope that help.

73 Chris
DL5NAM

www.logsearch.de

> -----Ursprüngliche Nachricht-----
> Von: "Tony Lord" <tony.lord at lfpuk.co.uk>
> Gesendet: 10.10.06 10:48:59
> An: <dx4win at mailman.qth.net>
> Betreff: FW: [Dx4win] ICOM IC 756 Pro II


> 
> Further to my posting below, I received the following reply off the ICOM
> reflector:
> 
> " I don't think a Y connector is a good ideal, but I think that HRD 
> and DX4WIN will support "virtual" ports. In other words, with HRD 
> running, it can connect to DX4WIN virtually to pass on the radio 
> settings to DX4WIN. I am sure there is settings for this on either 
> HRD web site or DZX4WIN web for getting all this to work together."
> 
> Does any one know if DX4WIN has such settings ??
> 
> 73's de Tony G8DQZ
> 
> 
> -----Original Message-----
> From: dx4win-bounces+tony=g8dqz.co.uk at mailman.qth.net
> [mailto:dx4win-bounces+tony=g8dqz.co.uk at mailman.qth.net] On Behalf Of Tony
> Lord
> Sent: 09 October 2006 17:46
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] ICOM IC 756 Pro II
> 
> 
> 
> Hi all,
> 
>  
> 
> I have an IC 756 Pro II. Socket 7 on the reverse is the CI-V control jack
> (remote). I have this connected to my computer for the logging software
> (DX4WIN). I would also like to have HRD connected, but of course only one
> item of software can be connected via this connecter and its respective com
> port.
> 
>  
> 
> Has any one had any experience of using two CI-V level converters (each with
> its own comport assigned) connected via  a Y connector?? Does this work or
> can one piece of software interfere with the other when connected  thus??
> 
>  
> 
> ICOM's CT-17 is for connecting up to 4 rigs to a PC, not the way round I
> want??
> 
>  
> 
> Appreciate peoples advice.....
> 
>  
> 
>  
> 
> 73's De Tony G8DQZ
> 
> 
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
> 
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win


_______________________________________________________________________
Viren-Scan für Ihren PC! Jetzt für jeden. Sofort, online und kostenlos.
Gleich testen! http://www.pc-sicherheit.web.de/freescan/?mc=022222