[Dx4win] Cancel Filter

[Rob Snieder]

I use 7.02-14 to start with, I create a filter in the menu FILTER >
SELECTION and select for instance a date range, I see the filter is active
and the filter name is visible in the title bar, using the CANCEL FILTER
option and ESC doesn't release the filter. I will downlaod 7.02-15 to see if
that makes any difference.

-----Original Message-----
From: Cliff Ahrens [mailto:cahrens at mywdo.com] 
Sent: 20 May 2006 14:34
To: 'PA2R via Muurkrant'
Subject: RE: [Dx4win] Cancel Filter

Hi Rob.  I'm using 7.02.15 here, and I can release a filter using either the
ESC key or the menu FILTER/CANCEL FILTER.  I'm not sure what's causing your
problem with it, but thought you might want the feedback that at least some
of us can't replicate the issue.
Good luck with trying to resolve the problem.

Cliff K0CA

-----Original Message-----
From: dx4win-bounces+cahrens=mywdo.com at mailman.qth.net
[mailto:dx4win-bounces+cahrens=mywdo.com at mailman.qth.net] On Behalf Of PA2R
via Muurkrant
Sent: Saturday, May 20, 2006 7:20 AM
To: Dx4win at mailman.qth.net
Subject: [Dx4win] Cancel Filter


After using a filter I try to release it via the menu FILTER > CANCEL FILTER
but the filter stays active. Is this a bug or am I doing something wrong,
going out of DX4WIN and start it again releases the filter.
 
73 Rob PA2R
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win