FW: [Dx4win] Error connecting to radio

[Stan Staten]

Portmap.ini is the same in both save folders.  It has no info other than
listing of the LPT ports as follows:

[LPTMAP]
LPT1=
LPT2=
LPT3=

73 Stan, N3HS

-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu] 
Sent: Friday, May 19, 2006 5:44 PM
To: Stan Staten
Cc: Paul van der Eijk
Subject: Re: [Dx4win] Error connecting to radio


Is your PORTMAP.INI file the same in 7.01 and 7.02?

Have you tried swapping each radio to the other COM port?

If everything is the same, and it doesn't work, perhaps Paul broke
something in 7.02.

- Jim

--- Stan Staten <stan.staten at verizon.net> wrote:

> When switching to radio 2 I get the following error: 
> "ie_BadId-Specified comport doesn't exist" This is curious because it 
> sort of works in that the log shows the band radio 2 is on, but if I 
> click on a spot I do get an error that the port is in use by something

> else.  When I bring up V7.01 it works just fine.
> 
> Setup:
> Win XP Pro
> Port in question COM3 via a USB->Serial converter
> DX4WIN 7.02 Build 14
> Ram 512MB
> Processor AMD Athlon 3000
> Radio 1 FT-1000MP on COM2
> Radio 2 FT-897 on COM3
> The port shows in the Device Manager and remains as COM3 when I plug 
> it into a different USB port (it drops of the Device Manager list when

> I unplug it and then reappears when I plug it into a different USB 
> port).
> 
> Suggestions please.
> 
> 73 Stan, N3HS
> 
> 
> 
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
> 


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA
+978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us