[Dx4win] Radio Time Out

[Jim Reisert AD1C]

ICOM radios work fine with DX4WIN.  I have not had the timeout problem. Have
used both 756 Pro and Pro III.

Make sure you are are using latest version of microHam router (3.0.2) and
firmware (2.5).

Also make sure your ICOM is set to a REAL baud rate --- NOT AUTO --- and that
both DX4WIN and microHam are using that SAME baud rate.

73 - Jim AD1C

--- Wayne N5WD <n5wd at charter.net> wrote:

> 
> 
> On Mon, 6 Mar 2006 21:13:07 -0500, ki4fyr wrote:
> > First, I appreciate all of the responses.  My system is Icom
> > 756ProII, microHam box, dx4win set up.  The radio is on and working
> > fine, but the message Radio Timed Out comes up for no apparent
> > reason.  If I then check the microHam software, it is still reading
> > the information from the radio just fine, frequency, mode.  So it
> > seems that it must be a problem with the dx4win software.  
> 
>   <snip>
> 
> You're not checking microHam while DX4Win is up and running also, by chance?
> ----------------------------------------------------------------------
>    R. Wayne Day    N5WD    n5wd at charter.net
>    Fort Worth, Texas  USA
> ----------------------------------------------------------------------
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>