[Dx4win] Split spot with IC-756 pro III

[Jim Reisert AD1C]

--- 9K2HN <9k2hn at 9k2hn.com> wrote:

>    I'm using ICOM IC-756 pro III in my new qth, when i try to spot
> anyone who is on split mode the dx4win will take only my Rx freq only
> and skip the TX although the radio is set for split. it is working fine
> in the other qth with the FT-1000 Mark-v. any one have the same problem?

The ICOM radio protocol does not send the SPLIT status to the logging software.
 This has been true for many years, and seems will continue for many years. 
Kenwood and Yaesu do not have this limitation.

Some software, like CT and Writelog, have a command to send a split command to
the radio, so the software can keep track of split itself.  However, if the
user then hits the split button manually, the radio and software will be out of
sync.

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us