[Dx4win] IC-706MKIIG with CT-17

[N5PA]

I am trying to hook my IC-706MKIIG to DX4WIN via my CT-17 computer
interface.  I thought it would be straight forward.  I hooked the CT-17 to
COM4, power to my power supply, and the single cable with the two 1/8 inch
phono plugs to the CT-17 and the IC-706MKIIG.  The original hex address on
the 706 was 58H and that did not work and then I changed it to 48H and that
did not work, either.  I left the baud rate on the radio set at AUTO.  This
seems like a fairly straightforward installation and it does not work.  Any
help would be appreciated.  I could not get it to work with WriteLog,
either.

73,
Alan, N5PA