[Dx4win] Radio Switching Broken in 7.02 {Scanned}

[Rick Craig]

Hi Randy, I just checked it with my setup, a DXDoubler with radio 
selection off the parallel port and 2 756Pro's, and it seems to work
fine here.  With the DXD in auto, selecting radio 1 in DX4win causes
the left radio to be selected for logging and the radio 1 lights in the
DXD to light.  Selecting radio 2 in Dx4win selects the right radio 
for logging and the radio 2 lights in the DXD to light.

Could you have reversed the comport numbers when you setup 
the preferences in Dx4win??

73 Rick, N6ND

At 09:30 PM 6/6/2006 -0500, Randy Farmer wrote:
>Am I really the only person who has noticed that the LPT radio 
>switching bit is inverted in 7.02? Surely there's at least one other 
>person who uses DX4WIN and switches radios through an "industry 
>standard" CT-type LPT control. I would sure like some support out 
>there for trying to get this fixed. With all the high-power software 
>control, it's a major pain to have to manually toggle two switches on 
>my DX Doubler to switch radios. Help me out here.
>
>73...
>Randy W8FN
>
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win
>

n6nd at arrl dot net


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Please contact support at computer-medic.us if you have 
questions about this email.