[Dx4win] Radio Switching Broken in 7.02

[ON4AOI]

Hi Randy,

Looks very logical here now
LPT pin14 = LOW (0 volt) when on Radio1
LPT pin14 = HIGH (5 volt) when switching to Radio2

Probably this caused by rewriting the LPT banddecoder output
So it doesn't change anymore when SPOTS arrive.

But in my opinion (but who am I) this is more logical since Dx4win starts
always with radio1 so there is no need to switch on any transistor &/or
relay. It's only needed when you switch to radio2. This is easy done with
one transistor and a multi contact relay without having to reverse the
signal first. 

  

73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm

-----Original Message-----
From: dx4win-bounces+on4aoi=skynet.be at mailman.qth.net
[mailto:dx4win-bounces+on4aoi=skynet.be at mailman.qth.net] On Behalf Of Randy
Farmer
Sent: Thursday, June 01, 2006 1:18 AM
To: Dx4win at mailman.qth.net
Subject: [Dx4win] Radio Switching Broken in 7.02

I just got 7.02.15 installed over the long weekend, but in doing so 
I've discovered that the Radio 1/2 flag at pin 14 of the LPT port has 
been inverted in the new release! I use a Top Ten DX Doubler to 
switch between two radios and it was (and still is) working 
flawlessly in 7.01. Now the LPT command causes the DXD to select 
Radio 2 when Radio 1 is selected by DX4WIN, and vice versa. This 
really needs to be fixed sometime soon.

Randy, W8FN

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win