[Dx4win] Can I configure the banddecoder output?

[ON4AOI]

Hi Anders,

No you can't change the pin out on the LPTport 
Available is a BCD code output 

73 Guy ON4AOI

BAND DECODER and related stuff at

http://www.on4aoi.be/banddecoder.htm

DX4WIN soft and related stuff at

http://www.on4aoi.be/dx4win.htm

DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at

 http://www.on4aoi.be/keyer.htm

ARSWIN link and related stuff at

http://www.on4aoi.be/web7.htm

DXTELNET soft and related stuff at

http://www.on4aoi.be/dxt.htm


-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Anders Janis SM4RNA
Sent: Monday, September 05, 2005 9:34 AM
To: Dx4win at mailman.qth.net
Subject: [Dx4win] Can I configure the banddecoder output? 

Hi all!

Is it possible some how to configure what pin(s) are activated in the
paralellport connector when changing band? If it could be (like in Ham Radio
Delux ) I would not need a banddecoder to select antenna. Then I could just
let each pin drive a optocoupler controlling a coax relay.

/Anders
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win