[Dx4win] BV7 and dx4win

[Dimitriy Borzenko]

Hi Kar !

I'm using custom paper setting 90X140 mm and "Unprintable Aria" - all
0's (zeros).
I have small dislocation (1-1.5mm) of printing text but all text in the
QSL fields.

Best regards.
de 4z5cp

-----Original Message-----
From: Radivoj KAR [mailto:r.kar at orange.fr] 
Sent: Thursday, September 01, 2005 1:04 PM
To: 'Dimitriy Borzenko'; dx4win at mailman.qth.net
Subject: RE: [Dx4win] BV7 and dx4win

Hi Dimitriy,

I understand. BTW, what format of paper do you chose to print QSL from
your
Lasejet? I tried different formats choices available with my Laserjet
4000
and it always becomes very difficult to get BV7 configure text to get
into
the right places in the QSL fields!
73,
Radi

************************************
Radivoj Kar, F6GNZ
2 Villa des Sorbiers
92741 Meudon la Foret
E-mail: r.kar at chello.fr
Phone : +33 (0)1 73 48 10 40
GSM : +33 (0)6 30 30 01 01
************************************

 -----Original Message-----
From: 	Dimitriy Borzenko [mailto:dibor at netvision.net.il]
Sent:	Monday, August 29, 2005 5:40 PM
To:	r.kar at chello.fr; dx4win at mailman.qth.net
Subject:	RE: [Dx4win] BV7 and dx4win

Hi Radi !
Tnx for answer.
Yes of cause BV7 its good program for management and printing QSL's.
But for tracking awards I need also QSL status in Dx4win!
By the way I'm printing on QSL's with already pre-printed QSO data
fields -
printing very GOOD.(I'm using HP LaserJet 6L)


-----Original Message-----
From: Radivoj KAR [mailto:r.kar at orange.fr]
Sent: Monday, August 29, 2005 1:22 PM
To: 'Dimitriy Borzenko'; dx4win at mailman.qth.net
Subject: RE: [Dx4win] BV7 and dx4win

Hi,

I found it is better to set QSL received flags in DX4WIN, export into
BV7
and do QSL printing from there.
I haven't tried to do what you have been doing, so don't know if the
same
error message would appear after re-importing into DX4WIN. I do all my
QSL
management in BV7, it's a great program for this. The only limitation is
that it is too difficult to set-up printing directly to QSL cards if one
has
them with already pre-printed QSO data fields..

73, Radi F6GNZ
 -----Original Message-----
From: 	dx4win-bounces at mailman.qth.net
[mailto:dx4win-bounces at mailman.qth.net]  On Behalf Of Dimitriy Borzenko
Sent:	Friday, August 26, 2005 11:46 PM
To:	dx4win at mailman.qth.net
Subject:	[Dx4win] BV7 and dx4win

Hello list.

Anybody have experience with BV7?
1. I'm exporting my Dx4win log to ADIF for BV7
2. Printing on QSL's and mark QSO's - QSL received.
3. Export from BV7 to ADIF
4. From Dx4win importing ADIF file with option "Imported QSO sets Conf.
flag"
I got message "2259 confirmed QSOs were not found in the log"  - why ?


Best regards

de 4z5cp

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win