[Dx4win] SSB mode changes when centering frequency for PSK31

[Jay Hainline]

Well, unfortunately Ron, the radio will not "center" on the psk frequency
when in lower sideband. I want to be able to put the signal in the middle of
the pass band of my filter which is at 1500 hz. Being able to decode the psk
signal on lower or upper sideband is not the issue here. Hope that explains
it.

73 Jay

Jay Hainline  KA9CFD  EN40om
Colchester, IL


-----Original Message-----
From: Ronald A Loneker Sr KA2BZS [mailto:ka2bzs at nac.net] 
Sent: Friday, October 28, 2005 13:29
To: Jay Hainline
Subject: Re: [Dx4win] SSB mode changes when centering frequency for PSK31


Hi Jay.. I use LSB or USB for PSK31 with no problems.   So I leave my 
rig on LSB on 40 & 80M.. RTTY is only LSB though.  FWIW..Ron

Jay Hainline wrote:

>I have a question for the group on how to stop the radio from changing 
>modes when I click to center the radio for PSK31 operation. I am using 
>DX4WIN ver. 7.01 interfaced to an Icom 756proII using the 756pro radio 
>control settings. The problem occurs when listening to PSK31 on 40 or 
>80 meters using USB. When you click to center the radio on the signal, 
>it defaults to LSB. I would like to know what to change to keep the 
>software from flipping the radio from USB to LSB when on 80 or 40 
>meters PSK31.
>
>73 Jay
>
>Jay Hainline  KA9CFD  EN40om
>Colchester, IL
>
>
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
>
>
>  
>

-- 
      Ronald A. Loneker Sr. KA2BZS
#1DXCC * 160M DXCC * A1-OP * NJDXA * 9BDXCC
          Honor Roll (CW-SSB-Mixed)

  See my New Flex-flyer Key (Pat. pending) at: 
          http://www.cwforever.com