[Dx4win] Rigblaster

[Larry Gauthier (K8UT)]

John,

I use the RIGblaster Plus with an Icom 756 ProIII, DX4Win 7.01, MMTY in FSK, 
and a WaveNode wattmeter (LPT port interface). I operate phone, CW, RTTY, 
and PSK modes, and it works well _AFTER_ spending a lot of time messing 
around with the internal jumpers. I can switch between modes instantly 
without any reconfiguration or switch flipping -- accomplished only by using 
2 serial and two parallel ports.

- first serial port for rig control
- second serial port for MMTTY transmit control
- first parallel LPT port for rotor control
- second parallel port for CW keying and Wavenode wattmeter interface

If you decide to go with a RIGblaster Plus, let me know -- I'd be happy to 
share the document I wrote that describes the correct settings in the RB 
Plus. (( I do not know if those would translate into equal success with a 
"straight" RIGblaster))

-larry
K8UT
----- Original Message ----- 
From: "John Kjos" <w9rpm at centurytel.net>
To: "DX4WIN" <dx4win at mailman.qth.net>
Sent: Wednesday, October 05, 2005 15:38
Subject: [Dx4win] Rigblaster


> Hi again, Is anyone using a Rigblaster with DX4WIN, being able use the 
> RTTY window in DX4WIN? I have been thinking about getting one. Thanks- 
> John
> EMAIL: w9rpm at centurytel.net
> WEBPAGE: http://www.w9rpm.com/
> AOL IM: W9RPM
>
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win