[Dx4win] BV7: Direct printing on QSL cards

[Radivoj KAR]

Hi Rog,
I questioned the author of BV software: he suggested to use inkjet Epson
printer which can be set for the required paper size :)!
But, for printing several thousands of DX-ped QSL cards it is a bit slow and
expensive solution! As sticking labels in such situation is also too time
consuming, I guess the only solution is to chose the smallest "standard"
paper size (like DL  envelope), stick a QSL in the middle and on right side
of the envelope, and measure margins as it was on the envelope one wish to
print. This will allow using our fast and high-capacity ink cartridge
Laserjet printer. This is the way I figured-out that may solve the issue.
Have a try....
73,
Radi F6GNZ
 -----Original Message-----
From: 	Roger Borowski [mailto:K9RB at bellsouth.net]
Sent:	Sunday, April 24, 2005 8:25 PM
To:	radivoj.kar at chello.fr
Subject:	Re: [Dx4win] BV7: Direct printing on QSL cards

I'm also using a HP 4000, Radi. If you hear of any solutions, please share
them with me. I have not found any but gave up rather easily. Thanks & 73,
Rog-K9RB
K9RB at arrl.net

----- Original Message -----
From: "Radivoj KAR" <radivoj.kar at chello.fr>
To: "DX4WIN Reflector (E-mail)" <dx4win at mailman.qth.net>
Sent: Sunday, April 24, 2005 1:36 PM
Subject: [Dx4win] BV7: Direct printing on QSL cards


Trying to print directly to reserved space on 140x90 cm QSL cards using
DF3CB BV7 software.
My HP Laserjet 4000 printer doesn't support this paper size so using any
other standard format changes all my  prepared "label" position and margin
parameters.
Has anybody solved this problem and how?
73,
Radi F6GNZ



_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win