[Dx4win] cw announce

[Roger Borowski]

Jorge, See if your sound card has a set of pins that you can push on the
connector that presently goes to your PC's internal speaker. Some do, but
many do not. If it has two inputs for more than one CD-Rom drive, you can
also use one of these if one is still available, and not being used, but you
must use a swamping resistor to limit the input to the sound card to near
line level vs.the PC speaker level. That's the only way, as the software
just talks to the PC speaker circuitry as designed, likely with the
assumption that you can still use it without a sound card and to make it
work without any added hardware requirements.
73, -=Rog-K9RB=-

----- Original Message ----- 
From: "Jorge García" <ea8ase at telefonica.net>
To: <dx4win at mailman.qth.net>
Sent: Thursday, January 27, 2005 9:28 AM
Subject: [Dx4win] cw announce


>
> Dr. Paul, in ver. 6.04 spots CW announce still  through the small speaker
of
> the computer?Let me know if there are a solutiontnx es 73,jorge
> garcia/EA8ASE
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>