[Dx4win] Installing the New Release

[Tony Lord]

John,

You are of course 100% correct. To copy and paste these two files over to
new save dictory will loose the new info. In TCP file I just (using notepad)
added the single additional cluster address which I had on V6.03 to the new
6.04 tcp file.

Regarding QSL managers, I just accepted new v6.04 file with no changes. In
my case I had not altered this file.

73's Tony G8DQZ


-----Original Message-----
From: J. F. Samuels [mailto:k2cib at arrl.net] 
Sent: 20 January 2005 22:52
To: Tony Lord; DX4WIN List Server
Subject: Re: [Dx4win] Installing the New Release

No one has mentioned that in order to restore QSL managers, and their 
addresses, and any changes you might have made in your Country file that Jim

AD1C did not make, further steps must be taken.  See the DX4WIN HELP file.

Also, if you copy your old DX4WIN.TCP file over, you will lose the changes 
that Paul has just made.  Better to inspect and merge the files.

John, K2CIB
----- Original Message ----- 
From: "Tony Lord" <tony.lord at lfpuk.co.uk>
To: "'n3drk'" <n3drk at triad.rr.com>; "'dx4win'" <dx4win at mailman.qth.net>
Sent: Thursday, January 20, 2005 1:27 PM
Subject: RE: [Dx4win] new release


>
>
> John,
>
> Here is the info given to me earlier today and what I did successfully 
> about
> 4 hours ago!:
>
>
> "Here's how I do it:
>
> Each version of DX4WIN is in its own sub-directory:
> ...
> \Ham Radio\DX4WIN602
> \Ham Radio\DX4WIN603
> \Ham Radio\DX4WIN604
>
> 1. Perform a fresh install into "Ham Radio\DX4WIN604"
> 2. Copy your key (filename = <callsign>.key) from the previous \DX4WIN603
> folder to the new v604 folder
> 3. Launch v603 and do a <F>ile <P>references "Write ini file". Close v603.
> 4. Launch v604 and do a <F>ile <P>references "merge ini file" from the
> location you saved in step 3
> 5. Select <F>ile <O>pen, and open your old V603 log file with V604 (which 
> is
>
> what you are running now
> 6. Select <F>ile <S>ave as, and save your log file into the 
> \DX4WIN604\SAVE
> directory.
> 7. Go through all the preferences and reset the ones that are not
> automatically imported with the ini file
>
> Done!
>
> -larry
> K8UT"
>
> Hope above helps you, only one thing I would add is, if you have changed 
> any
> cluster setting in TCP file you need to amend these too.
>
> 73's de Tony G8DQZ
>
>
> -----Original Message-----
> From: dx4win-bounces at mailman.qth.net 
> [mailto:dx4win-bounces at mailman.qth.net]
> On Behalf Of n3drk
> Sent: 20 January 2005 18:13
> To: dx4win
> Subject: [Dx4win] new release
>
> I have version 6.03 so what do I need to do to download version 6.04? Save
> any files or databases? Is there a website with instructions?
> john-n3drk
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>