[Dx4win] Dx4Win 5.03 and TS-2000

[Alain, F 5 L I W]

Hi everybody,
Few days ago I got a new KENWOOD TS-2000 transceiver to replace my old ICOM
IC-745.
I try to connect Dx4Win to the TS-2000 but I get the following error message
:

Radio timed out
Radio interface has been disabled

I understand that Dx4Win don't access to my TS-2000 but I can connect it
with ARCP 2000 (KENWOOD Radio Control Program for TS-2000) and with MCP 2000
(KENWOOD Memory Control Program for TS-2000) or with Ham Radio Deluxe or
WINTEST.
The Com port is the same in these four softs (Com 1).
In Dx4Win I select 4800 baud (and I change the baud rate at 4800 bauds in
TS-2000 menu) or I select 9600 baud in Dx4Win and in TS-2000 menu too but
it's not working (but all is working fine all the time with the others
softs).
I try to check the box DTR High but no RTS High, check the box RTS High but
no DTR High, check these two box or check not at all but it's never working.
I check the configuration in Dx4Win 6.03. It's the same than in Dx4Win 5.03.
Anybody have an idea and there are some people who are using Dx4Win with a
TS-2000 (I suppose yes) ?

73 QRO

Alain, F 5 L I W
REF # 41548
10-X # 50408
WWL : JN27oe