SV: [Dx4win] USB-SERIAL adapter Converter.

[Geir Ø Eriksen (Jobb)]

Its the same on any usb comm ports in xp
But you can change the com ports number in win xp and win 2000 easy under
control panel system hardware com ports settings advanced port nuber
And a restart and the com number is changed
Regards
Geir
LA5SJA
-----Opprinnelig melding-----
Fra: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
På vegne av Tony Lord
Sendt: 7. januar 2005 10:36
Til: 'Dani EA5FV'; 'DX4WIN'
Emne: RE: [Dx4win] USB-SERIAL adapter Converter.

Hi Dani!

I had the same problem, lots of devices wanted serial ports and only one on
my main computer! I brought a VSCOM 4 x serial port adaptor that plugs into
a spare USB port. Immediately the computer (under XP) installed it and I now
have 5 serial ports. The additional 4 serial ports are used for the radios
(Icom IC746 ProII & Icom IC9100), telenet and morse decoder. It was simple
Plug and Play!

XP named these 4 extra ports as COM Ports 3, 4 5 & 6. I have noticed that
some hardware/software only accepts COM ports 1 through 4. so it was a
matter of juggling around hardware/software that would accept the correct
port numbers.

This VSCOM adaptor is very good, I couldn’t source it in UK but found a
friendly supplier in the United States who shipped it over to me. Now they
have European distributor, try this link: 

http://www.vscom.de/dc4.htm


Good luck!!!

73's De Tony G8DQZ

Kind Regards
 
 
Tony Lord
LFP (UK) Ltd.
Tel :  + 44 (0) 1359 242900
Fax:  + 44 (0) 1359 242121
GSM + 44 (0) 7785 323839

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.  Whilst this E-Mail and any attachments has been scanned by Norton
AntiVirus, LFP does not take any responsibility for the consequences of any
computer viruses which may also have been transmitted.


-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Dani EA5FV
Sent: 06 January 2005 18:12
To: DX4WIN
Subject: [Dx4win] USB-SERIAL adapter Converter.

Hello I need help,  
I try to communicate my Kenwood TS 2000 with DX4WIN through a port USB with
an USB-SERIAL adapter Converter, I am not able to make him work. If it works
directly to a  
port series COM.Some suggestion.  
Thank you.
Dani EA5FV
ea5fv at ure.es
_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win