[Dx4win] BV7 and dx4win

[Dimitriy Borzenko]

Hi Radi !
Tnx for answer.
Yes of cause BV7 its good program for management and printing QSL's.
But for tracking awards I need also QSL status in Dx4win!
By the way I'm printing on QSL's with already pre-printed QSO data
fields - 
printing very GOOD.(I'm using HP LaserJet 6L)


-----Original Message-----
From: Radivoj KAR [mailto:r.kar at orange.fr] 
Sent: Monday, August 29, 2005 1:22 PM
To: 'Dimitriy Borzenko'; dx4win at mailman.qth.net
Subject: RE: [Dx4win] BV7 and dx4win

Hi,

I found it is better to set QSL received flags in DX4WIN, export into
BV7
and do QSL printing from there.
I haven't tried to do what you have been doing, so don't know if the
same
error message would appear after re-importing into DX4WIN. I do all my
QSL
management in BV7, it's a great program for this. The only limitation is
that it is too difficult to set-up printing directly to QSL cards if one
has
them with already pre-printed QSO data fields..

73, Radi F6GNZ
 -----Original Message-----
From: 	dx4win-bounces at mailman.qth.net
[mailto:dx4win-bounces at mailman.qth.net]  On Behalf Of Dimitriy Borzenko
Sent:	Friday, August 26, 2005 11:46 PM
To:	dx4win at mailman.qth.net
Subject:	[Dx4win] BV7 and dx4win

Hello list.

Anybody have experience with BV7?
1. I'm exporting my Dx4win log to ADIF for BV7
2. Printing on QSL's and mark QSO's - QSL received.
3. Export from BV7 to ADIF
4. From Dx4win importing ADIF file with option "Imported QSO sets Conf.
flag"
I got message "2259 confirmed QSOs were not found in the log"  - why ?


Best regards

de 4z5cp

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win