[Dx4win] Labels

[Paul van der Eijk]

Paul,

Press the F1 key when the label editor is open; all the terms are
defined in the on-line help.

Keep in mind that when you specify the label layout, the actual printer
you use for printing plays a role too. Many printers cannot print all the way
to the left on a page and start printing lower on the page (the paper margins).
These margins are different for different printer models. When you use 
the preview for a layout you should get a good idea what the final print will
look like without wasting paper.

--Paul


At 02:35 PM 8/1/2005, Jim Reisert AD1C wrote:
>Please reply to Paul or the reflector, *not* AD1C !
>
>Date: Mon, 01 Aug 2005 20:00:47 +0200
>From: F6EXV <f6exv at wanadoo.fr>
>To: Jim Reisert AD1C <jjreisert at alum.mit.edu>
>Subject: Labels
>
>I cannot seam to be able to properly design my label...
>What are the exact definitions of vertical pitch, vertical spacing and 
>vertical shift ?
>My labels on paper are designed this way :
>About 3mm before the first label starts. Label height is 37.3mm. The 
>labels are next to each other (no space between labels). About 3mm after 
>the end of last label and end of page.
>I just cannot design it properly so that the printed text will start at 
>the same height of each label...
>Any help will be appreciated.
>73
>F6EXV
>
>
>--
>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
>USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
pvandereijk at cox.net
http://www.dx4win.com