[Fwd: Re: [Dx4win] CW Interface - Problem detected]

[py2xb at integral.com.br]

Mike and Jim

Thanks for the tip. However it didn't work. I have full installed DX4WIN
6.04 and the problem remains. LPT1 is not recognized. As this computer has
no serial ports, I am not able to test the transceiver keying thru a
serial port.

I would say that there is some kind of issue with DX4WIN and windows XP
related to LPT keying. I am wondering if I am the only one having this
problem.

regards

Fred PY2XB

--------------------------- Mensagem Original ----------------------------
Assunto: Re: [Dx4win] CW Interface - Problem detected
De:      "VA3MW - Port Credit" <va3mw at portcredit.net>
Data:    Sab, Abril 23, 2005 7:49 pm
Para:    py2xb at integral.com.br
--------------------------------------------------------------------------

Instead of copying the files, why don't you do a proper install?  That 
should solve the problem.

Mike VA3MW

----- Original Message -----
From: <py2xb at integral.com.br>
To: <dx4win at mailman.qth.net>
Sent: Saturday, April 23, 2005 6:21 PM
Subject: [Dx4win] CW Interface - Problem detected


>
> Hello. I would appreciate a help on this :
>
>
> I am using DX4WIN 6.03 in a desktop Pentium computer under windows 98. I
use the CW keyer interface thru LPT1 port without any problem in this
computer.
>
> I am preparing myself for a Dxpedition next month. I have copied the
whole DX4WIN directory to a Toshiba notebook (Pentium 4 under windows
XP, no serial ports but has LPT1). So far so good. Everything works
fine. However when I attempt to use the Keyer by configuring LPT1 in
Preferences|Control . I receive a message: Cannot find LPT1 for keying,
when leaving he preferences program.
>
> However LPT1 is there and works with other software installed in the
notebook computer.
> BTW the only program running in the notebook is the DX4WIN.
>
> Also, I have tried the following: I have not configured the CW interface
(none on the port). I have configured the Band Encoder instead. I have
assigned LPT1 for the band dencoder. No message is printed when leaving
the preferences program.
>
> Any help is welcome. Thanks
>
>
> FRED CARVALHO - PY2XB
>
>
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
>