[Dx4win] Spot filtering by zone pbm

[J. F. Samuels]

Works fine for me - I'm using #1-#10 to keep it in the North and South 
American continents.  You must have some other problem.

John, K2CIB
----- Original Message ----- 
From: "Radivoj KAR" <radivoj.kar at chello.fr>
To: "DX4WIN Reflector (E-mail)" <dx4win at mailman.qth.net>
Cc: "Paul van der Eijk (E-mail)" <pvander at erols.com>
Sent: Sunday, October 17, 2004 1:22 PM
Subject: [Dx4win] Spot filtering by zone pbm


> Hi,
> Previously, with VHF packet cluster and  dx4win 5.03, I used  announce
> filtering by zone of alert origin, which worked OK.
> After starting using 6.03 and TCP/IP for announcement, spot window shows
> packets coming from everywhere, despite that in Preferences/Packet 1 (or
> RTTY) window I have entered #14,#15,#16 in Prefixes/Zones for spotters box
> to limit spots only to those announced by European stations.
>
> I can filter spots directly via a cluster command "accept/spots by_zone
> 14,15,16" , but am curious is dx4win presuming this when TCP/IP is used 
> and
> in this case ignores it's own filter?
>
> Any comments?
> 73,
> Radi F6GNZ
>
>
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>