[Dx4win] Packet Window Rig Control of FT1000MP

[Kostas SV1DPI]

The only thing i know is that the same is happening here.
I am interesting for an answer also...
kostas SV1DPI

----- Original Message -----
From: <kelly at thejohnsons.ws>
To: <dx4win at mailman.qth.net>
Sent: Monday, October 11, 2004 6:24 PM
Subject: Re: [Dx4win] Packet Window Rig Control of FT1000MP


If I am using stacking register "A" right now in the Phone portion of the
band
and I have the "B" stacking register loaded with something in the CW band,
then why
does DX4WIN change the "B" stacking register next time I click on a spot (or
at least
that's what it appears to do).  I would expect it to set the frequency of
the current
stacking register, not switch to the other one and change frequency.  I
guess I can
sorta understand why the software programmer may have done that, but it sure
doesn't
match the way I use these registers.  If I remember correctly, WriteLog
doesn't seem
to do it this way.

----- Original Message -----
From: "Bruce Meier" <n1ln at consolidated.net>
Date: Mon, 11 Oct 2004 05:38:37 -0500
To: <kelly at thejohnsons.ws>
Subject: Re: [Dx4win] Packet Window Rig Control of FT1000MP

> Kelly,
>
> Your FT1000 and DX4WIN are both working correctly and there is no config
> change available. What is happening is by clicking on a spot, that
frequency
> is being loaded into the memory (one of the two stacking registers) on the
> MP.    The last frequency the MP is on is left in the register.
>
> Bruce- N1LN
>
> ----- Original Message -----
> From: <kelly at thejohnsons.ws>
> To: <dx4win at mailman.qth.net>
> Sent: Sunday, October 10, 2004 22:59
> Subject: [Dx4win] Packet Window Rig Control of FT1000MP
>
>
> > This weekend I decided to use the packet window of DX4WIN for the first
> time.
> > I usually use an internet browser.  I use an FT-1000MP.  On this rig
each
> band has
> > an "A channel" and a "B channel".  Each press of the band button toggles
> between
> > "A" and "B".  I usually keep one of the 2 channels centered in the lower
> CW portion
> > of the band and the other somewhere in the phone portion of the band so
I
> can
> > easily switch between Phone and CW.  The annoying thing I noticed was
that
> this
> > seems to get screwed up if I "double-click" on a packet spot so that
> DX4WIN sets
> > my VFO frequency.  It seems to switch to the other channel then set it
to
> the
> > desired frequency.  It took me awhile to figure out why my "A" and "B"
> channels
> > were getting screwed up.  Does anyone know if there is some
configuration
> > item somewhere that will change this behavior?
> >
> >
> > _______________________________________________
> > Dx4win mailing list
> > Dx4win at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/dx4win
>

_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win