[Dx4win] Using Rigblaster for CW/RTTY

[J. F. Samuels]

Like Joe said, you have to use two ports.   Run the second one to the 
RigBlasterPro B interface.  If you define the second port with MMTTY (or 
MixW), you can use FSK, if your rig supports it.  BTW, you must use a real 
port, not a USB derived one (with only one known exception), for successful 
FSK.

John, K2CIB
----- Original Message ----- 
From: "Joe Stepansky" <kq3f at comcast.net>
To: <dx4win at mailman.qth.net>
Sent: Sunday, November 07, 2004 2:16 PM
Subject: [Dx4win] Using Rigblaster for CW/RTTY


> I've been through the manual and can't figure this out.  I've successfully 
> configured DX4WIN for CW keying using my Rigblaster Pro.  However, when 
> trying to set up RTTY, which is also on COM1, the software refuses to open 
> the RTTY window, saying COM1 is already in use.  Similarly, when I can use 
> MMTTY successfully when DX4WIN is closed, but I get a COM1 error message 
> if DX4WIN is open.
>
> Guess I can get rid of CW keying if necessary, but is anyone using DX4WIN 
> with a Rigblaster for both CW and RTTY?  Or is there some other way to 
> interface something like MMTTY with DX4WIN?
>
> 73, Joe KQ3F
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>