[Dx4win] psk31 tx hang up problem

[Marc Wullaert]

you could try to copy the old  parameters in to the new one ...first copy
the 6.03 dx4win.ini on a other place ,
you never know

marc on4ma

----- Original Message -----
From: "Jay Hainline" <ka9cfd at winco.net>
To: <dx4win at mailman.qth.net>
Sent: Saturday, May 22, 2004 9:53 PM
Subject: [Dx4win] psk31 tx hang up problem


When I open dx4win.ini in the old ver. 5.03, this is the parameters listed
under [PSK31]


[PSK31]
CenterFreq=1500
MainFreq=1285
FreqChan2=522
Mode=0
AFC=1
Net=1
Smooth=3
AFCRange=150
BaseLine=30
SlowMeter=1
ThreshHold=0
Display=0
Split1=39
Split2=22
Split3=60
KEYING=4
KEYDTR=1
OTHERH=0
CHAN2=0
Scale=1

Under the new version 6.03, these are the parameters:


[PSK31]
CenterFreq=1500
MainFreq=1490
FreqChan2=1580
Mode=0
AFC=1
Net=1
Smooth=3
AFCRange=100
BaseLine=30
SlowMeter=1
ThreshHold=12
Display=0
Split1=33
Split2=52
Split3=50
KEYCW=3
KEYCWL=0
CHAN2=0
Scale=1

There is a slight difference. KEYING, KEYDTR, OTHERH have been replaced with
KEYCW, KEYCWL. Can someone enlighten me? Should I change something here?

Jay Hainline  KA9CFD  EN40om
Colchester, IL
ka9cfd at arrl.net


_______________________________________________
Dx4win mailing list
Dx4win at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.689 / Virus Database: 450 - Release Date: 21/05/2004