[Dx4win] 6.03 woes

[Paul van der Eijk]

Don,

1. Check if the formatting of the QSL label makes sense.

2. Reboot the computer and only start dx4win (you may be running out
of resources running Windows98 by chance?)

Paul

At 11:35 AM 5/19/2004 -0700, Donald Eriksen wrote:
>Thanks to the responders to my print problem. I'm posting the error message
>data I get when I try to print QSL data in hopes Paul will see it and
>perhaps help me.
>
>Error
>
>An exception occurred!
>Access violation at address 00402B16 in module 'DX4WIN.EXE': Read address of
>FFFFFFFF
>
>I use an HP Deskjet 500 which prints fine on everything else and has worked
>fine with v. 6.02.
>
>Once or twice I got the message: "Exception Ocurred - Canvas does not allow
>drawing".
>
>I re-loaded 6.03 with the same results. I don't know what else to say about
>it.
>
>Don W6FFH
>
>
>
>_______________________________________________
>Dx4win mailing list
>Dx4win at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
pvandereijk at cox.net
http://www.dx4win.com