[Dx4win] Creating a Cabrillo export file?

[Larry Gauthier (K8UT)]

Don,

Hmmm... your DX4WIN menu must be different than mine. I have no <Contest>
menu item.
    - In the QSO Window under "QSO", there is a <C>ontest mode selection
    - In the QSO Window under "Reports" I have a <C>ontest -> Rate Sheet
selection.

But I have no menu item that looks like what you are describing.

After receiving the message from Roger (K9RB), I wrote my own Cabrillo
conversion routine. It ain't pretty , but it works:
- first set a filter that selects only the QSOs worked during the contest
- use the <W>indows <L>ogbook, "Report Editor" to create an extract with the
fields required by the NAQP rules
- write the report to a text file
- run my conversion against the resulting text file

-larry
K8UT
----- Original Message ----- 
From: "Donald Eriksen" <don.wsixffh at verizon.net>
To: "Larry Gauthier (K8UT)" <K8UT at ARRL.NET>; <dx4win at mailman.qth.net>
Sent: Sunday, July 18, 2004 1:46 PM
Subject: Re: [Dx4win] Creating a Cabrillo export file?


> Click on Contest, you get a pull-down menu. Click on Cabrillo File, you
get
> a near full-page window to verify/change your info for the summary portion
> of the Cabrillo file. Check carefully and change as necessary (usually
comes
> up showing HIGH POWER (change to low for NAQP) and Mixed mode, change that
> to RTTY. Also there's a choice to email it or display it when done, your
> decision. Then you get the usual SAVE window. I save mine in My Documents
> under CALL SIGN.log the usual desire of contest sponsers. Your ex.:
> K8UT.log.
> That's it, you can print it and email it later, or let WL set up the email
> for you.
>
> 73, Don W6FFH
>
>
> ----- Original Message ----- 
> From: "Larry Gauthier (K8UT)" <K8UT at chartermi.net>
> To: <dx4win at mailman.qth.net>
> Sent: Sunday, July 18, 2004 5:49 AM
> Subject: [Dx4win] Creating a Cabrillo export file?
>
>
> > I participated in the NAQP RTTY contest yesterday, and need to dump my
log
> > to the required Cabrillo format for submission. How is that
accomplished?
> > There is no "Cabrillo" choice in the <F>ile <I>mport/export menu, and
> > although I can export to a standard ADIF file... what do I do with that?
> >
> > Thanks in advance for any advice,
> >
> > -larry
> > K8UT
> >
> > _______________________________________________
> > Dx4win mailing list
> > Dx4win at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/dx4win
>