[Dx4win] EXT DATA -- from QRZ.com on line

Tue, 17 Feb 2004 00:07:29 -0700

Gary et.al.

I forgot to put the forward slash in the URL.

Here is the actual value I am using =3D>  www.qrz.com/

Be sure that the forward slash is there. Sorry, I should have copied the
entry rather than duplicating it from memory.

Tod, K=D8TO

=20

-----Original Message-----
From: [email protected] [mailto:[email protected]] =
On
Behalf Of Garry Shapiro
Sent: Monday, February 16, 2004 11:31 PM
To: DX4WIN Reflector
Subject: RE: [Dx4win] EXT DATA -- from QRZ.com on line

That is not working for me in 6.02.  When I hit [ENTER}, it tries to =
open
the QRZ.com site, but flashes through it to a "Cannot display" screen. =
The
reason for this becomes apparent---the URL entered in the IE address bar =
is
www.qrz.com, but with the DX callsign appended to the ".com"!

Would someone like to take a crack at explaining that?

Garry, NI6T

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Tod - ID
Sent: Monday, February 16, 2004 9:50 PM
To: 'DX4Win'
Subject: RE: [Dx4win] EXT DATA -- from QRZ.com on line

I wish to thank Chaz Cone for supplying the "magic" that allowed me to =
use
the QRZ.COM web access mentioned in the Version 6.0 manual.

The secret is to put the QRZ.COM URL (www.qrz.com) in both the Call sign
lookup address and the QSL lookup address sub windows of the EXT DATA
window. Then when one places the cursor on the Call in the regular QSO
window and presses the [F3]key a blank window appears with call sign in =
the
lower left corner. Now hit the [ENTER] key and the QRZ screen will =
appear.

Overall it is not as "slick" as pulling up the information from a CD =
that
has been stored on one's hard drive, but it does work.

Tod, K=D8TO

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win

_______________________________________________
Dx4win mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/dx4win