[Dx4win] Mark-V Configuration

Sun, 7 Sep 2003 10:12:43 -0400

That and/or anything connected to the serial interface... The EMP will
frequently kill serial ports... The TTL interface is even more fragile
so you need to check the rig and the level converter if the Mark-V uses
one.... If it's a "new" computer... I'm pretty sure Alan is right...

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Floyd Sense
Sent: September 6, 2003 20:55
To: N5PA; [email protected]
Subject: Re: [Dx4win] Mark-V Configuration

Are you sure the CAT interface in the Yaesu wasn't damaged in the
lightning strike?  I had a recent strike as well, and the computer was
involved.  Two buffer transistors in my IC-765 computer interface
circuitry were damaged and had to be replaced.

K8AC
----- Original Message ----- 
From: "N5PA" <[email protected]>
To: <[email protected]>
Sent: Saturday, September 06, 2003 2:40 PM
Subject: [Dx4win] Mark-V Configuration

After going through a lightning strike at the house I have the Mark-V
and new computer hooked back up.  I took the default settings for a
Yaesu FT1000MP in the radio settings, but I am not talking to the radio
and no CAT light ever blinks.  Any ideas what I am doing wrong?

Alan, N5PA

--- StripMime Report -- processed MIME parts --- multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML or had
an attachment.  Attachments are not allowed.  To learn how to post in
Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Dx4win mailing list
[email protected] http://mailman.qth.net/mailman/listinfo/dx4win

_______________________________________________
Dx4win mailing list
[email protected] http://mailman.qth.net/mailman/listinfo/dx4win